下面來說一下有骨安裝的拆卸步驟：1，手握住雨刮擺，向上拉起雨刮搖臂（注意，如果有些車型雨刮在引擎蓋下面隱藏?zé)o法直接抬起，請使用維修模式） 0.2，在雨刮下落對應的當風玻璃墊上毛巾一塊，是為了就避免搖臂不小心跌落打爛玻璃0.3，旋轉雨刮和搖臂夾角成90度（部分可以旋轉至45度） 0.4，觀察尋找雨刮和搖臂夾角位置的小暗扣（個別型號沒有該暗扣，請直接忽略這一步）0.5，按下小暗扣不松手，另外一只手把整個雨刮整體向下拉，向搖臂根部方向下拉（個別型號沒有該暗扣，請直接晃動下拉雨刮）。雨刷下移過程掛鉤露出后，從一側取下雨刷即可完成拆卸.XX

In contact with the glass type, the wiper should be cleaned except for its structure. The important part is the strip. Since the wiper wipes the glass rainwater by the wiper strip, the strip design is very important. The wiper strip material is divided into two categories: natural rubber and synthetic rubber, among which synthetic rubber has a long service life. Generally, the high-grade wiper will be made of double-layer rubber. The soft rubber will be used at the joint between the strip and the steel to ensure good smoothness when wiping, and the glass is bonded to the glass. A slightly hard material allows the strip to have a certain amount of force to scrape the rain. In addition, the grade of the strip will also affect the quietness and service life of the wiper. Some products will add an additional graphite component to make the wiper quieter and smoother.xx

該傳感器位于內后視鏡上方，通過檢測擋風玻璃上滴落的水量來控制雨刮器自動擦拭。 （雨刮器開關處于AUTO位置）當組合開關損壞或發生故障時，車輛將進入跛行模式。此時，近光燈將自動點亮，雨刮器將根據以下條件運行：1。有雨量傳感器，根據雨量傳感器需要動作; 2.未配置雨量傳感器，雨刷開關手柄被切換，雨刮器繼續以低速模式擦拭。請勿觸摸車輛外部雨量傳感器的檢測區域。否則，當刮水器開關處于AUTO位置時，刮水器可能會被劃傷，從而對人員和車輛造成損壞。