宏旭定制   圓形井室鋼模具   井室鋼模具

圓形井室鋼模具   井室鋼模具的具體型號而定的，在混凝土井室的制作上，往往按照拆模方式進行，如果內徑比較小了，會采取拔模的制作方法。目前使用較多的井室模具的內徑一般都是4mm、5mm、6mm，但是我們公司生產的這些模具的尺寸也不是固定的，我們公司可以根據不同客戶的不同需要制作出各種尺寸內徑的圓形檢查井模具，在使用井室模具的時候也需要注意一些細節，因為為了使用方便，模具都可以拆卸，所以在使用的時候就需要用螺絲把這些模具組裝起來，在組裝的時候需要注意擰緊，不要在灌料的時候因為組裝不夠緊而導致模具斷開，這樣也會浪費很多的原材料，其次我們的圓形井室鋼模具   井室鋼模具在使用的時候需要在表面涂抹一層油，刷油是為了減小模具表面的摩擦力，使表面更加的光滑，在脫離產品的時候，拆卸模具的同時，產品也很容易就就從模具上分離開來，拆卸模具的時候，外膜是兩塊的，內模是三塊的，而且內膜的三塊大小是不一樣的，這樣，分離產品的時候更容易把模具拿出來，減少因為脫離產品消耗的時間，就可以在較短的時間內得到更多的產品，獲得更高的收益。The concrete model of steel mould for circular well chamber depends on the specific model. In the production of concrete well chamber, the formwork removal method is often adopted. If the inner diameter is small, the method of drawing is adopted. At present, the inner diameter of the most commonly used well chamber molds is 4mm, 5mm and 6mm. However, the dimensions of these molds produced by our company are not fixed. Our company can produce round inspection well molds with various sizes and inner diameters according to different needs of different customers. When using the well chamber mold, we need to pay attention to some details, because for the convenience of use, all the molds can be used Disassembly, so we need to use screws to assemble these molds. When assembling, we need to pay attention to tightening. Don't disconnect the mold because the assembly is not tight enough during filling, which will also waste a lot of raw materials. Secondly, our round well chamber steel mold A layer of oil should be applied on the surface of the well chamber steel mold when it is used. The purpose of oil painting is to reduce the friction of the die surface and make the surface more smooth. When the product is separated from the product, the product can be easily separated from the mold when the mold is disassembled. When the mold is disassembled, the outer membrane is made of two pieces, and the inner mold is made of three pieces, and the size of the three pieces of inner membrane is different In this way, it is easier to take out the mold when separating the products, so as to reduce the time consumed by separating the products, so that more products can be obtained in a shorter time and higher profits can be obtained.