紅薯打粉機 蓮藕粉薯類磨碎機 全自動型紅薯打粉機廠家

華升牌淀粉機屬全封閉節能型，結構合理，性能優良，造型美觀，具有自動進料，破碎分離，排渣，省時省工，更換篩網的時間可在半個小時內完成，提高了淀粉的提粉率，淀粉提取率在 98 以上，此輥帶水生產，使淀粉純白度更高，該機每小時生產量1.5-2dun，配用7.5千瓦電動機，可操作性強，可直接安裝四輪拖拉機前工作、手扶拖拉機、電動機配套使用，該機安裝使用維護、移動方便，是個體戶的理想設備。

華升牌淀粉分離機一次完成鮮薯的粗破碎、細磨漿、漿渣分離，廣泛應用于各中、小規模淀粉廠及家庭用戶的運用。

華升牌淀粉機結構簡單，使用方便，運轉平穩，生產率高，維修便利。能夠一次完成鮮薯的粗破碎、細磨漿、漿渣分離三道工序，能夠重復利用漿液，減少了淀粉生產過程中的廢水。

紅薯淀粉分離機改變了手工生產淀粉時因氧化造成的淀粉光彩變差、變暗的現象;加工過程中被破碎打垮的粉渣在顯微鏡下呈絲狀，有利于淀粉從纖維上游離出來，因此進一步提高了淀粉的提取率。  

Sweet potato flour beater lotus root flour potato grinder automatic sweet potato flour beater manufacturer

Huasheng brand starch machine is a fully enclosed energy-saving type, with reasonable structure, excellent performance, beautiful shape, with automatic feeding, crushing and separation, slag discharge, saving time and labor. The screen screen can be changed in half an hour. The starch extraction rate is 98 The production capacity of the machine is 1.5-2 Dun per hour, equipped with 7.5 KW electric motor. It can be directly installed in front of the four-wheel tractor, walking tractor and motor supporting use. The machine is easy to install, use, maintain and move. It is an ideal equipment for individual households.

Huasheng starch separator is widely used in small and medium-sized starch factories and household users.

Huasheng starch machine has the advantages of simple structure, convenient use, stable operation, high productivity and convenient maintenance. It can complete three processes of fresh potato coarse crushing, fine refining and pulp residue separation at one time. It can reuse the slurry and reduce the waste water in the starch production process.

Sweet potato starch separator changes the phenomenon that starch luster becomes poor and darkens due to oxidation when starch is produced by hand; the broken powder residue in the processing process is filiform under the microscope, which is conducive to the starch dissociation from the fiber, so the extraction rate of starch is further improved.

薯類制粉設備主要由螺旋清洗機、刨碎分離機、磨漿分離機、渣漿分離組合篩和攪拌機等單機組合而成，特別適合于鄉鎮企業和戶用于馬鈴薯和甘薯等薯類淀粉的加工。

操作人員在嫻熟地掌握設備的性能、機械結構和操作規程后才能上崗作業。操作時，若設備發生故障，應對癥采取以下維修和保養措施：

1、分離機常見故障及排除使用時，磨漿分離機磨片間隙應調整為0.5毫米左右，操作時先擰上部的手柄以使螺旋旋緊，然后回退90度即可；如果刨碎分離和磨漿分離機在工作時出現主軸卡碰，應立即停車檢查；若發現軸承損壞應及時更換同型號的軸承；制粉機組工作時，若發現刨碎分離機的電流表長時間處于超載狀態，應調整清洗機的喂人量。

特別注意的是：刨碎分離機和磨漿分離機一定要嚴防鐵石等硬雜物進入機內，以免損壞機件。

2、整機維修及保養要點：小型薯類制粉設備各傳動軸承應經常加注潤滑油、脂，尤其是磨漿分離機和刨碎分離機主軸兩端的油杯，每工作48小時應加注一次鈣基潤滑脂，整機每月須定期保養一次；

制粉組合單機上所有的電器設備和傳動皮帶均不得打濕或進水，以免發生短路或皮帶打滑事故；若發現傳動皮帶打滑應及時調整皮帶輪距，使皮帶漲緊；清洗機螺旋下的鋼絲網使用一定的期限后易損壞，每加工50萬公斤鮮薯后應予以更新；刨絲滾筒上裝置的齒條使用一段時間后，若發現生產效率下降、粉渣變粗，應將齒條拆下，換另一面新齒繼續使用；薯類制粉機組停用后，應對整機維修保養，清洗軸承并注足滑潤油、脂，所有電器設備均應采取防潮措施，以免影響設備的性能和使用壽命。

Potato milling equipment is mainly composed of screw cleaning machine, planer separator, grinding separator, slag slurry separation combined screen and blender. It is especially suitable for processing potato and sweet potato starch in township enterprises and households.

The operator can work only after mastering the performance, mechanical structure and operation rules of the equipment. In case of equipment failure during operation, the following repair and maintenance measures shall be taken:

1. When using the separator, the disc clearance should be adjusted to about 0.5mm. During operation, the upper handle should be screwed tightly, and then it can be backed back 90 degrees. If the main shaft of the crushing separation and pulp separator collides, the machine should be stopped for inspection immediately. If the bearing is damaged, the bearing of the same type should be replaced in time; the pulverizing unit works If it is found that the ammeter of the crushing separator is overloaded for a long time, the feeding amount of the cleaning machine should be adjusted.

Special attention is: Planer separator and grinding separator must strictly prevent iron and stone and other hard debris into the machine, so as to avoid damage to machine parts.

2. Main points for maintenance and repair of the whole machine: lubricating oil and grease should be added to the drive bearings of small potato milling equipment, especially the oil cups at both ends of the main shaft of the grinding separator and the planer separator. Calcium based grease should be added once every 48 hours of operation, and the whole machine should be maintained regularly once a month;

All electrical equipment and driving belts on the single machine of pulverizing unit shall not be wet or watered, so as to avoid short circuit or belt slipping accident; if the transmission belt is found to be slipping, the belt wheel gauge shall be adjusted in time to make the belt tight; the wire mesh under the screw of the cleaning machine is easy to be damaged after a certain period of time, and it shall be renewed after processing 500000 kg of fresh potatoes; the rack of the device on the shaving drum is used to make the belt tight After using for a period of time, if it is found that the production efficiency decreases and the powder slag becomes coarse, the rack should be removed and replaced with a new tooth on the other side for continuous use; after the potato flour milling unit is out of service, the whole machine should be repaired and maintained, and the bearing should be cleaned and filled with lubricating oil and grease. All electrical equipment should be provided with moisture-proof measures to avoid affecting the performance and service life of the equipment.

華升淀粉機一直致力于淀粉機的研發與改進，多年來堅持不懈的努力，獲得的廣大客戶的認可與支持，在眾多淀粉機行業中，華升淀粉機更受市場的歡迎。 

華升機械廠作為一個老牌的淀粉機企業，本著以誠信經營為理念，以優良的產品質量，完善的服務獲得眾多客戶的信賴。 

華升生產的淀粉機在制作淀粉時有相當多的優勢，生產制作的淀粉內部緊湊密度高，外部光滑細膩，制作時間短，產量高還做到了節能環保，大大滿足了客戶的使用需求。華升淀粉機型號齊全，出料口可根據客戶需求，加工定制，可生產各種規格的材料，機器制造成功后，客戶可根據使用需求，帶材料到廠家免費現場試機，使客戶買的放心，用的舒心。

歡迎來電咨詢或到廠考察試機，聯系電話13014610089