東莞市臺銘光電科技有限公司
東莞市臺銘光電科技有限公司
店齡6年 · 企業認證 · 廣東省東莞市
主營產品: 視覺光源led燈珠, 插件led燈珠, 大功率led燈珠, 貼片led燈珠, 紅外線發射管, 全光譜植物led燈珠, 紅外線接收頭有, 0805貼片led燈, 0603貼片led燈, 0402貼片led燈, 1206貼片led燈, 5050貼片led燈, 3535貼片led燈, 5730貼片led燈, 0201貼片led燈, 1615貼片led燈, 小蝴蝶led燈珠, 食人魚led燈珠, COB 面光源
免費會員
手機掃碼查看 移動端的落地頁
店齡6年 · 企業認證 · 廣東省東莞市
萦营萩萬萨萪营萩萨萩萨
臺灣臺銘光電-3mm白光有邊直插led燈珠-發光二極管
價格
訂貨量(個)
¥0.01
≥1000
店鋪主推品 熱銷潛力款
聯系人 陳子華
萦营萩萬萨萪营萩萨萩萨
發貨地 廣東省東莞市
在線客服
商品參數
|
商品介紹
|
聯系方式
品牌 臺銘光電
電流 20mA
電壓 2.8-3.4V
發光顏色 白光
間距 3mm
發光角度 30度
封裝 3mm直插
型號 TM-L03WYBJK-E
商品介紹
臺銘直插式LED,體積小,高亮度,能耗低,應用于照明,背光等領域。
注:亮度、角度、色溫、紫光波段均可按客戶要求做貨。
Type 規格/型號 | Emitting Color 顏色 | Material 原材料 | View Angle 發光角度 | VF(V) 電壓 | IV (MCD) 亮度 | WL(nm) 波長 | IF(MA) 電流 | |||
Typ | Max | Min | Typ | Min | Max | |||||
TM-L03R-E (紅光) | Red | AlGaInP | 30° | 1.8 | 2.4 | 2000 | 4000 | 620 | 630 | 20MA |
TM-L03Y-E (黃光) | Yellow | AlGaInP | 30° | 1.8 | 2.4 | 300 | 600 | 585 | 595 | 20MA |
TM-L03O-E (黃綠) | Yellow Green | AlGaInP | 30° | 1.8 | 2.4 | 50 | 100 | 565 | 575 | 20MA |
TM-L03O-E (橙光) | orange | AlGaInP | 30° | 1.8 | 2.4 | 300 | 600 | 600 | 610 | 20MA |
TM-L3CG-E (翠綠) | Green | InGaN/GaN | 30° | 2.8 | 3.4 | 1200 | 8000 | 520 | 530 | 20MA |
TM-L3B-E (藍光) | Blue | InGaN/GaN | 30° | 2.8 | 3.4 | 300 | 500 | 460 | 475 | 20MA |
TM-L3UV365-E (紫光) | Purple | InGaN/GaN | 30° | 2.8 | 3.4 | 6 | 8 | 365 | 370 | 20MA |
TM-L03UV370-E (紫光) | Purple | InGaN/GaN | 30° | 2.8 | 3.4 | 10 | 13 | 370 | 375 | 20MA |
TM-L3UV380-E (紫光) | Purple | InGaN/GaN | 30° | 2.8 | 3.4 | 14 | 18 | 380 | 385 | 20MA |
TM-L03UV400-E (紫光) | Purple | InGaN/GaN | 30° | 2.8 | 3.4 | 60 | 70 | 395 | 400 | 20MA |
TM-L03UV405-E (紫光) | Purple | InGaN/GaN | 30° | 2.8 | 3.4 | 70 | 80 | 400 | 405 | 20MA |
TM-L03UV410-E (紫光) | Purple | InGaN/GaN | 30° | 2.8 | 3.4 | 80 | 90 | 405 | 410 | 20MA |
TM-L3NB55-E (白光) | White | InGaN/GaN | 30° | 2.8 | --- | 6000 | --- | 5500 | 6000 | 20MA |
TM-L3ZB65-E (白光) | White | InGaN/GaN | 45° | 2.8 | --- | 6000 | --- | 6500 | 7000 | 20MA |
TM-L3LB80-E (白光) | White | InGaN/GaN | 30° | 2.8 | --- | 6000 | --- | 2500 | 10000 | 20MA |
Supporter shaping:
Shaping of the supporter must be conducted before welding. While shaping, the
bending position of the supporter must at least be located at 3mm from the bottom
of the encapsulating resin. Also, avoid multiple bending on the same position。 Please
choose the
appropriate apparatus to fixate the supporter in order to avoid exerting extra pressure
on resin. Using the jointing section of the pin and resin as fulcrum is strictly
prohibited since the pressure mounted would directly damage the internal 。
illuminating structure and thus cause irreversible defection of the product..Due to the
same reason, the interval between the welding hole on the PCB board should be
strictly matched with the pin interval of the product when assembling the product.
bending position of the supporter must at least be located at 3mm from the bottom
of the encapsulating resin. Also, avoid multiple bending on the same position。 Please
choose the
appropriate apparatus to fixate the supporter in order to avoid exerting extra pressure
on resin. Using the jointing section of the pin and resin as fulcrum is strictly
prohibited since the pressure mounted would directly damage the internal 。
illuminating structure and thus cause irreversible defection of the product..Due to the
same reason, the interval between the welding hole on the PCB board should be
strictly matched with the pin interval of the product when assembling the product.
聯系方式
公司名稱 東莞市臺銘光電科技有限公司
聯系賣家 陳子華 (QQ:3191427098)
電話 萨萭萪萩萧萭萬萧营萫萧萫
手機 萦营萩萬萨萪营萩萨萩萨
傳真 萨萭萪萩萧萭萬萧营萫萧萫
地址 廣東省東莞市