這SCXI-1333(零件號:777687-33)是一種通用的端子板，用戶可以使用所有的行和列連接。由于這種終端片的通用性質，用戶可以連接行或列來進行各種網絡配置。上的彈簧端子SCXI-1333使用戶能夠訪問每個4 × 16框架。這SCXI-1333為掃描儀高級輸出和外部輸入觸發信號提供端子，并包含兩個128針DIN連接器，用于連接模塊之間的列。該模塊適用于測量類別I，計劃提供不超過150 V的信號電壓。該模塊可承受高達800 V的脈沖電壓。用戶應盡量不要將該模塊用于連接信號或進行類別II、III或IV內的估計，并且盡量不要與115或230 VAC的電源電路(例如錢包插座)連接。

當使用網絡開發插頭時，只需連接相同類型的端子板。連接不同種類的接線板會損壞模塊或與模塊相關的硬件。例如，用戶可以連接至少兩個SCXI-1333接線板。

使用矩陣擴展插頭的最有效方法是信號調理端子板是為了增加一個4 × 32矩陣的線數。矩陣擴展插件連接列以擴展行的數量。要擴展矩陣的行數，將矩陣擴展插頭連接到兩個端子板的頂部或底部列連接器。

The SCXI-1333 (Part Number: 777687-33) is a universally useful terminal block that gives the user access to all row and column connections. Because of the general-purpose nature of this terminal piece, the user can join the row or columns to make a wide range of network configurations. Spring terminals on the SCXI-1333 enable the user to get to every 4 × 16 framework. The SCXI-1333 gives terminals to scanner advanced output and outer input trigger signals and contains two 128-pin DIN connectors for connecting columns between modules. This module is rated for Measurement Category I and planned to offer signal voltages no more noteworthy than 150 V. This module can withstand up to 800 V impulse voltage. The user should try not to utilize this module for connection with signals or for estimations inside Categories II, III, or IV and try not to interface with MAINS supply circuits (for instance, wallet outlets) of 115 or 230 VAC.

When utilizing network development plugs, just interface terminal blocks of the same type. Interfacing diverse sorts of terminal block can harm the module or the hardware associated with the module. For instance, the user can interface at least two SCXI-1333 terminal blocks.

The most effective method to utilize a matrix extension plug with SCXI terminal blocks is to expand the quantity of lines of a 4 × 32 matrix. The matrix extension plug interfaces columns to extend the quantity of rows. To extend the quantity of rows of a matrix, associate a matrix expansion plug to the top or base column connectors of the two terminal blocks.