進口膜盒式疏水閥推薦-德國洛克

一、進口膜盒式疏水閥產品簡介：

德國《LOCKE》洛克-進口膜盒式疏水閥，Film cassette trap，也叫膜盒式疏水器，膜盒式蒸汽疏水閥，膜盒式蒸汽疏水器，主要是根據元件金屬膜盒通過熱脹冷縮原理開啟和關閉閥門。廣泛用于蒸汽主管線、盤熱管線、干燥器和工業加熱蒸汽設備系統，供熱采暖是最理想的選擇。

Locke - imported bellows trap, film cassette trap, also known as bellows trap, bellows steam trap and bellows steam trap, mainly opens and closes the valve according to the principle of thermal expansion and cold contraction of metal membrane box of components. It is widely used in the main steam line, plate heat pipeline, dryer and industrial heating steam equipment system. Heating is the best choice.

二、進口膜盒式疏水閥技術參數：

☆規格范圍：DN15-DN100

☆溫度范圍：-40℃-600℃

☆壓力范圍：1.6-32Mpa

☆連接方式:法蘭、內螺紋、焊接。

☆制造標準:國標、美標。

☆閥體材質:鑄鋼、不銹鋼、鉻鉬鋼、鉻鉬釩鋼。

 Specification range: dn15-dn100

Temperature range: - 40 ℃ - 600 ℃

Pressure range: 1.6-32mpa

Connection mode: flange, internal thread, welding.

Manufacturing standard: national standard, American Standard.

Valve body material: cast steel, stainless steel, chrome molybdenum steel, chrome molybdenum vanadium steel.

三、進口膜盒式疏水閥結構優點：

1、動作速度快，零泄漏。

2、結構簡單，維護方便。

3、部件全部采用合金處理的不銹鋼，耐磨，耐氣蝕，使用壽命長。

4、排空能力強，排水迅速，安裝方式隨意。

5、可以實現多個膜盒組合，適用于大的排量場合。

6、具有良好的排空氣性能，不怕凍，零泄漏，背壓率達到75%。

四、進口膜盒式疏水閥性能及優點：

1. 進口膜盒式疏水閥在極少冷凝水形成的工況下都無新鮮蒸汽泄漏。

2.啟閉動作靈敏、可靠∣自動排空氣性能好∣加熱系統升溫快∣能確保加熱設備高效運行。

3.該閥B型膜盒過冷度大、排水溫度低∣噪音小∣是環保型的理想疏水閥∣節能效果顯著。

4.在低溫環境中不怕凍、防水擊、耐過熱、體積小、重量輕∣并且任何方式均可安裝。

5.閥腔內設有不銹鋼過濾網∣維護保養簡單。

6.不銹鋼閥芯件堅固耐用∣耐腐蝕性氣體∣并在關閉時無撞擊∣穩定性好∣使用壽命長。

1. There is no fresh steam leakage at the inlet diaphragm trap under the condition of little condensate formation.

2. Sensitive and reliable opening and closing action ∣ good performance of automatic air exhaust ∣ fast temperature rise of heating system ∣ ensuring efficient operation of heating equipment.

3. The B-type membrane box of the valve has large supercooling degree, low drainage temperature, low noise, and is an ideal drain valve of environmental protection type with remarkable energy-saving effect.

4. In low temperature environment, it is not afraid of freezing, water-proof, heat-resistant, small size, light weight and can be installed in any way.

5. Stainless steel filter screen is set in the valve chamber, which is easy to maintain.

6. The stainless steel valve element is solid and durable ∣ corrosion resistant gas ∣ and has no impact when closing ∣ good stability ∣ long service life.

五、進口膜盒式疏水閥工作原理：

熱靜力型膜盒式蒸汽疏水閥的主要動作元件是金屬膜盒，內充一種氣化溫度比水的飽和溫度低的液體。裝置剛起動時，管道出現低溫冷凝水，膜盒內的液體處于冷凝狀態，閥門處于開啟位置。當冷凝水溫度漸漸升高，膜盒內充液開始蒸發，膜盒內壓力上升，膜片帶動閥心向關閉方向移動，在冷凝水達到飽和溫度之前，疏水閥完全關閉，膜盒隨蒸汽溫度變化控制閥門開關，起到阻汽排水作用。有開溫度低于飽和溫度 15 ℃ 和 30 ℃ 兩種膜盒供選擇。

The main action element of the steam trap is metal diaphragm, which is filled with a liquid whose gasification temperature is lower than the saturation temperature of water. When the device is just started, there is low-temperature condensate in the pipeline, the liquid in the capsule is in the state of condensation, and the valve is in the open position. When the temperature of condensate gradually increases, the liquid filled in the capsule starts to evaporate, the pressure in the capsule rises, and the diaphragm drives the valve center to move towards the closing direction. Before the condensate reaches the saturation temperature, the drain valve is completely closed, and the capsule controls the valve switch with the change of steam temperature, which plays the role of steam blocking and water drainage. There are two kinds of bellows with opening temperature 15 ℃ and 30 ℃ lower than saturation temperature.